{"id":1372,"date":"2016-05-19T14:39:51","date_gmt":"2016-05-19T14:39:51","guid":{"rendered":"http:\/\/3gwiz.com.au\/passion_wp\/?p=1372"},"modified":"2016-05-19T14:39:51","modified_gmt":"2016-05-19T14:39:51","slug":"too-busy-for-photos-in-the-light","status":"publish","type":"post","link":"http:\/\/www.gwiz.au\/passion_wp\/?p=1372","title":{"rendered":"Too busy for photos in the light"},"content":{"rendered":"<p>The first layer of 6 mm plywood on the cabin top is completed so here is a photo taken after dark. The beam on top of the cabin is a deep section of LVL which is keeping the front edge of the cabin top straight while the glue is curing on extra layers of reinforcement underneath. The extra layers of 6 mm plywood reinforcement are held on place with temporary screws from below up into the smaller strips of timber on the front of the cabin top.<\/p>\n<p>After the photos I added a couple of temporary timber stringers to the cabin top on both sides of the companionway to keep the deck as straight as possible while the glue cures. I will add two layers of 6 mm plywood under the deck on each side of the companionway to take the load of winches. Once the glue on these is cured the last layer of 6 mm ply will be added over all the cabin top and then I will be able to cut out the top over the companionway. Until then it is a bit of a wriggle to get into the hull through the small opening.<\/p>\n<div id=\"attachment_1378\" style=\"width: 179px\" class=\"wp-caption alignright\"><a href=\"http:\/\/3gwiz.com.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.17.jpg\"><img aria-describedby=\"caption-attachment-1378\" loading=\"lazy\" class=\"size-medium wp-image-1378\" src=\"http:\/\/3gwiz.com.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.17-169x300.jpg\" alt=\"First layer of 6 mm plywood on the cabin top of our Didi 40 Cr\" width=\"169\" height=\"300\" srcset=\"http:\/\/www.gwiz.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.17-169x300.jpg 169w, http:\/\/www.gwiz.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.17-579x1024.jpg 579w, http:\/\/www.gwiz.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.17.jpg 1520w\" sizes=\"(max-width: 169px) 100vw, 169px\" \/><\/a><p id=\"caption-attachment-1378\" class=\"wp-caption-text\">First layer of 6 mm plywood on the cabin top of our Didi 40 Cr<\/p><\/div>\n<div id=\"attachment_1379\" style=\"width: 310px\" class=\"wp-caption alignright\"><a href=\"http:\/\/3gwiz.com.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.44.jpg\"><img aria-describedby=\"caption-attachment-1379\" loading=\"lazy\" class=\"size-medium wp-image-1379\" src=\"http:\/\/3gwiz.com.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.44-300x169.jpg\" alt=\"View of the first layer of 6 mm plywood from the stern\" width=\"300\" height=\"169\" srcset=\"http:\/\/www.gwiz.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.44-300x169.jpg 300w, http:\/\/www.gwiz.au\/passion_wp\/wp-content\/uploads\/2016\/05\/2016-05-19-18.31.44-1024x579.jpg 1024w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><p id=\"caption-attachment-1379\" class=\"wp-caption-text\">View of the first layer of 6 mm plywood from the stern<\/p><\/div>\n","protected":false},"excerpt":{"rendered":"<p>The first layer of 6 mm plywood on the cabin top is completed so here is a photo taken after dark. The beam on top of the cabin is a deep section of LVL which is keeping the front edge of the cabin top straight while the glue is curing on extra layers of reinforcement [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[3],"tags":[],"_links":{"self":[{"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=\/wp\/v2\/posts\/1372"}],"collection":[{"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1372"}],"version-history":[{"count":2,"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=\/wp\/v2\/posts\/1372\/revisions"}],"predecessor-version":[{"id":1380,"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=\/wp\/v2\/posts\/1372\/revisions\/1380"}],"wp:attachment":[{"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1372"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1372"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.gwiz.au\/passion_wp\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1372"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}